Community

user avatar
I have been added to a group and an assignment has been created in that group. I have created a circuit and I want to know how do I submit my assignment?

Created by GMD Baloch• 10 months ago

General
user avatar
Hey, I was looking for any option to change the gates symbols shape from round (ANSI) to rectangle (IES) shape. Is this option available? Best, Stefan

Created by Stefan• 5 months ago

General
user avatar
I am making a circuit, but it is very complex which makes it difficult to understand. How do I shrink it down?

Created by Areela• 1 day ago

General
user avatar
For the people of the future - as in my perception there's no clear indication on how to setup the timing diagram - there is a "Flag" under "Misc" that is used to capture any signal from within your diagram and show its state in the timing diagram.

Created by Steffen Schuetz• 2 months ago

General
user avatar
If you are looking for a resource to buy cryptocurrency profitably, feel free to contact Coin24.io, the best exchanger that works on the territory of Ukraine, Poland and the Czech Republic. Whether it is Kyiv, Odessa, Kharkiv, Warsaw, Prague or Krakow, everywhere you can place an order for the purchase or sale of cryptocurrency in cash in a matter of minutes and receive the desired crypto or fi...

Created by Fllomt• 14 minutes ago

General
user avatar
Hi, I want to set the period of my clock to 8000ms and the delays of my components to be 1/16 of the period of the clock, i.e. to 500ms. I understood that the clock time is 1/2 of the whole period, so I set it to 4000ms. Then, I set my delays to 500 units, and 1 cycle = 4000 units. With these settings, the delays appear shorter than needed. What should be the correct parameters? Thank you in ad...

Created by AlisaG• 1 minute ago

General
user avatar
I want to rotate the subcircuits I made and also change the place of input and output

Created by Jones• 7 days ago

General
user avatar
Is there any way of changing the standard font used in CircuitVerse for text annotations? I'm planning on writing annotations such as hand-performed binary additions or truth tables, which are hard to align and arrange, and changing the default font to a monospace one would help.

Created by Jefferson Elbert Simões• 9 hours ago

Feedback
user avatar
Copy
2
Open
How to copy an existing circuit to a new circuit?

Created by Pushkar Nailwal• 3 months ago

General
user avatar
I am creating gates and adders. I have created a half-adder and I can see it in the tab on the top. Now I would like to reuse it on a new circuit so that I can create a full-adder without having to draw it all. Is that possible?

Created by Fabio• 6 months ago

General
user avatar
I've made a collection of circuits on a CPU project, and I've broken the project into a number of sub-circuits. I have a whole collection of nodes and I'd like to use them on other projects. Is this possible to do? If so, how do I do this? Thanks!

Created by Bruce Bergdahl• 7 months ago

General
user avatar
I don't know why the bitwidth error keeps occurring

Created by Nightslasher• 2 months ago

General
user avatar
How do I add music or sound to my circuitverse project?

Created by Divyam Sareen • 2 months ago

General
user avatar
I want to create a project using Arduino that contains an electric lock, a keypad, a 16 x 2 LCD screen, and also a sensor to measure the temperature and show the degree on the screen after unlocking the lock, and a fire system. I want to design a circuit if possible.

Created by علي حسين جعفر• 2 months ago

Feedback
user avatar
I try to simulate a sequence finder for 1011 using D Flip Flop. The output is supposed to go HIGH for 1011 but I get the output HIGH at the third digit, means when I have "101". I publish the simulation public as "Find 1011 sequence". Any hint would be appreciated, I might have synthetized a wrong circuit or set something umproperly.

Created by Luca• 2 months ago

Feedback
user avatar
I made a circuit and when I refreshed the page, it just kept showing loading animation. I thought it was some server issue so I waited overnight but it's still not loading.

Created by The Unknown• 27 days ago

Feedback
user avatar
i cant figure out how to add a sub circuit to main

Created by oscarbjb• 10 days ago

General
user avatar
I am unable to find resistors.

Created by Shubham Ingale• 12 days ago

General
user avatar
how can i find my offline saved projects

Created by Fahad nabi• 2 years ago

General
user avatar
I'm new here and I need help making a full adder.

Created by HalfAdder• a minute ago

General
user avatar
Hi Is it possible to implement a circuit using "both" NAND and NOR gates? I've been searching for a full afternoon but no luck in this.

Created by Masoud Ramezani• 13 days ago

General
user avatar
I want to change the order of the flags in the timing diagram, but I am not sure how. Right now, it seems stuck in the order of 'whichever flag I dropped onto the circuit first.' Is there a way to change the order in the timing diagram without having to delete and re-make the flags in that order? Thanks.

Created by Lavi Zamstein• a minute ago

General
user avatar
My mouse is throwing the diagram all over the place when I try to connect inputs, gates, etc. Is there a way to lock the zoom once you are zoomed in to where you want to be to create a circuit?

Created by Jason Hutchens• a minute ago

General
user avatar
https://t.me/pump_upp - best crypto pumps on telegram Make 1000% and more within 1 day, join channel @pump_upp

Created by [email protected]• 8 minutes ago

General
user avatar
Hi, tell me please what does this little circle in one of inputs of logic gate mean? It's the same like in not gate but it's before gate not after. How do I make it in CV?

Created by Mateusz Borowiec• 1 minute ago

General
user avatar
I want to create a memory unit in which I can store the memory in some other unit by the user but some other user can use that output without seeing the input in some other unit.

Created by Varnit Mittal• a minute ago

General
user avatar
It seems this parameter is not in the file [CV_CustomTheme.json] Is it possible to somehow get the file [CV_CustomTheme.json] with all possible parameters?

Created by Pavel 94• 5 months ago

General
user avatar
nmmnmnmn
1
Open
nnnnnn

Created by b• 12 months ago

Feedback
user avatar
I am trying to open the circuitverse on my iPad it shows a Red Screen of death. Can you please tell me why is shows like this. Details: Google Chrome version 92.0.4515.90. Ipad OS 12.5.6 Is is some browser issue or something else.

Created by Gaurav Parashar• 1 month ago

Feedback
user avatar
i think I did some construction that broke CV and now my circuits are glitched (some of them don't appear in the different subcircuit tabs) and I can't interact with the project elements anymore

Created by Lucas Morais Freire• 3 months ago

Feedback