Community
not able to see any option to provide a clock input to a flop
Since you support a Buffer gate with tri-state outputs (0, 1 and open), it would be useful to use a different color wire when it’s output is open. Currently it uses dark green (the same as a 0 output) when the buffer’s output is open.
In the case where the outputs of multiple buffers are tied together, the wire path would be light or dark green to reflect the output of the enabled buffer, o...
The term “Text Direction” is confusion, as it implies how the characters in the text should be facing, rather than where the label should be positioned.
it would be less confusing if you used “Text Position” instead, with the choices “Top”, “Bottom”, “Left” and “Right”.
Thanks,
The default Flip Flop is positive edge triggered, but I need a negative edge triggered flip flop. How can I implement that?
Among my various computers, I have an ASUS X205TA which is a 32-bit tablet. I have been installing the latest 21H1 version on my computers and the tablet is the last however, when attempting to install 21H1, before the actual installation begins, I get an error message stating that Windows 10 is not compatible with the Broadcom 802.11agbn wireless SDIO adapter and the installation of 21H1 will ...
I want to cite one of my projects in a peer reviewed journal. Are there any copyright issues or things I need to take care of.
how to search for pmos ,nmos in circuitverse
I wanted to create a hex from separate inputs, but so far I don't see any way to do this. Help would be highly appreciated.
What does it change
I'm trying to find a way to update the circuit elements in the simulation canvas via the developer console. The reason for this is that I'm constructing a circuit where each stage has multiple elements with individual delays. These cumulative delays will affect the output of the circuit.
I started by inspecting the HTML and Javascript for the simulation canvas. The UI elements and images are...
https://circuitverse.org/users/49622/projects/subcircuit-problem
I created a minimum circuit that demonstrates a problem I saw in a larger circuit. In this circuit, there's an input with a tristate gate attached to a common bus. Also on the bus is a D flip flop, with it's input from the bus, and it's output sent to a tristate gate which outputs to the bus. That's the upper circuit on the Mai...
I'm reading the book called CODE by Charles Petzold. I'm currently in page 159 and I built a 8 bit binary adding machine that has 2 8 bit inputs. The sum is saved in an 8 bit level triggered D-type latch and the output of that 8 bit latch is given to the 2nd 8 bit input of the 8 bit adder. There's an Add button in the 8 bit latch which is basically just the clock, when 0 it will not save the 8 ...
I wanna put capacitors in my circuit, but i don't see them in the circuit elements.
If you can't add them, please tell me an alternative to them that i can use in my circuits.
I am making a booth algorithm multiplicator, which is due today. The project was close to finish, but out of the absolut blue, the page froze and I have not being able to use it again ever since. It happens only on this specific circuit, it loads forever, I can't interact with anything, can't copy.
please help
How do I view my online saved projects?
The program does not work on a tablet such as an ipad. That is unfortunate. Is there a solution for this?
Where is the seven segment display
There is a pop-up saying "Project was successfully destroyed" lost all my circuits till date ,
what to do ?
I am trying to set up a class, but want to include multiple TAs in the course. Is this possible? Also, is it possible to change password/username associated with an account?
how can i simulate the circuit system ?
I was unable to save my project online so i saved it offline. Is there any way i can load the saved project and continue working on it?
How to do wire connection between devices while working o mobile. And also how can I position device where I want.
I need to build a 7 segment display that will project my birthday, I have the a-g table done, just need help with k-mapping and designing
I made a comparator subcircuit to improve my CPU (it's a college activity). However, I always need to switch to the subcircuit page for my main circuit update the data which make use of these comparator. I don't know what is the problem, so, anyone can help me?
Example:
Subcircuit verilog Halfadder
module HalfAdder (a,b,s,c);
input a,b;
output s,c;
wire nand_2_out_0,nand_3_out_0,nand_0_out_0,not_0_out_0,nand_1_out_0;
nand nand_2 (nand_2_out_0,nand_0_out_0,b);
nand nand_3 (nand_3_out_0,nand_1_out_0,nand_2_out_0);
assign s = nand_3_out_0;
nand nand_0 (nand_0_out_0,a,b);
not not_0 (not_0_out_0,nand_0_out_0);
assign c = not_0_out_0;
nand n...
Hi all,
How do I move one circuit in one project to another project? The circuit is quite large and would be just about impossible to recreate.
When my added collaborators "Launch simulator" from a project I have created, they all obtain "Error 404". How to solve it ?
I am unable to reset my password as it leads me to a screen saying that circuit verse cannot handle this request
Please move the "clear project" away from the Save Project Online Option inside the Simulator Menu. I have had a few students that struggle with mouse dexterity and they hit the wrong option.
I can't able to access my truth table(combinational analysis) while doing my project which was given by the teacher
I can able to get it in the simulator other than the project work
