Community

user avatar
I have a bus that many tri-state components can choose to write too, but may not. I would like it if when no components write to the bus, it goes to 0x00000000. In a real circuit you could accomplish this with pull-down resistors. Is there a way in circuitverse or do I need another tri-state device to write a bunch of zeroes when enabled?

Created by Dandurin• 17 minutes ago

General
user avatar
I'm creating a circuit with an accumulator. Sometimes the circuit page gets auto-refreshed and the accumulator gets reset to 0. This weird behavior happens even if I disabled "clock enabled" in properties. Can I disable this auto-refresh?

Created by deliriousverilog• 1 hour ago

General
user avatar
I am doing a 3-bit asynchronous down counter and I want the clock to stop when the counter gives 0 as output. How do I do this? Please help me

Created by Shruti• 3 days ago

General
user avatar
how to prove distributive law using nand gates

Created by priya• a minute ago

General
user avatar
I am making a "enabler" which takes an 8bit input and an 1bit enable. The output is also an 8bit. When I try to change one bit of the input to 1 it just says that the output is forced to be 0 as though the output was an input. It worked last time so yeah.

Created by gan251mleap• 4 months ago

General
user avatar
I created a simple D FF circuit where the inverting output of the flip-flop is the input to the same flip-flop. It gives me the stack error. Any way around this? Thanks!

Created by Jude Pearse• 9 days ago

General
user avatar
Hello, I'm in the process of making a custom computer and I'm working on getting it to run programs. However, writing machine code to EEPROM one instruction or value at a time is difficult. I have an assembly language and an assembler, and I'd prefer to import that data instead of writing machine code manually, which is error-prone and tedious. Is there any way I could import an external binary...

Created by Andrew Lobley• 7 days ago

General
user avatar
Hola, resulta que hice un circuito y de repente la pantalla se quedo tildada en la animación de guardar y no puedo hacer cambios entre las pestañas por mas de que ya cierro y abro de nuevo sigue igual y a veces es como que el fondo se pone en rojo. Sería lindo si alguien me ayuda a solucionar esto.

Created by Fabian Alexander Garcia Tellez• 8 days ago

Feedback
user avatar
A significant improvement to the ROM and EPROM elements would be to allow loading their contents from a file. The basic idea would be to load the ROM or EPROM from an uploaded file. You could support binary files, where each byte in the file is a cell in the ROM or EPROM, or text-based file formats, like Intel Hexadecimal. This would be done via a new Load from File option. When select...

Created by PRL• 2 years ago

Feedback
user avatar
I'm new here and I need help making a full adder.

Created by HalfAdder• 6 months ago

General
user avatar
good day. What do red wires mean? I am not able to set a connection to the "max value on Counter". Thanks J

Created by Jess• 2 months ago

General
user avatar
How to use the RGB display matrix. I checked the manual but I couldn't find anything on it. plz help, thanks

Created by hridan• a minute ago

General
user avatar
m
2
Solved
.

Created by Harsh Sharma0• 27 days ago

Feedback
user avatar
sir i tried to design standard circuit for JK flip flop from SR flip flop. in toggle mode its showing an error of " simulation stack limit exceeded " please help

Created by vaibhav sareen• 3 months ago

General
user avatar
I am not sure if this would be possible or has been addressed, but it would be very useful if you could make subcircuits in irregular shapes other than rectangles. for instance, a circuit in the shape of a 'U' could be used as a socket for changeable subcircuits, like if you have many different versions of a data storage unit and want to be able to easily swap them. Or, it could be used to, for...

Created by Sira0909• 4 days ago

Feedback
user avatar
How do teachers set up a class so that they can create assignments, review student work, and grade in CircuitVerse? It did not ask me if I was an instructor or a student when I logged in and I don't see anything on the Teacher page. Thanks

Created by Denise Griffin• 2 days ago

General
user avatar
This switch is not described that I can find.

Created by RogDog• 22 minutes ago

General
user avatar
My testbench is saying reset RST is not present in circuit. I don't know what reset is, and I don't see an option for it in the test bench or on the circuit

Created by Raymond Stahl• a minute ago

General
user avatar
I don't understand how the RGB matrix works, like which pins do what, bitwidth for pins, etc., and the user guide doesn't explain it. How does it work?

Created by Sira0909• 14 days ago

General
user avatar
One day I logged in to check comments for my string CPU, the comments section was gone. I then tried logging into CircuitVerse on other device, however, the comments section was still missing. Why is this happening, and can I make the comments section come back?

Created by SJP4• 1 day ago

General
user avatar
My project I have spent a long time on is suddenly stuck in the loading screen and I cant save or change anything I have tried reloading the page and everything it still wont work.

Created by Ky Ky• 2 years ago

General
user avatar
The Splitter asks for #input bit and then for #outputbits, but it shows me alway one single output. I can't even configure the outputbits in the properties. Has anyone a solution.

Created by Lienhard Menzi• 2 days ago

General
user avatar
Can I change color of powered and unpowered wires?

Created by Shadow Realm• 2 days ago

General
user avatar
I'm a teacher and I've had two student who lost all of their work and were unable to recover their projects. When they tried to save, the blue check animation just keeps going. It turns out both students were running an ad blocker in Chrome. I only have two data points on this, but I'm suspecting that this might be the issue. Does anyone have similar experiences or suggestions on what might be ...

Created by Jeff Solin• 2 years ago

General
user avatar
Hallo for everynoe. d'ose somebody know how do I can create a Bus like in the "Not16" circuite of the following project https://circuitverse.org/simulator/18808. thanks for answering.

Created by jackAppleCake• 7 days ago

General
user avatar
I want to rotate the subcircuits I made and also change the place of input and output

Created by Jones• 2 months ago

General
user avatar
I have encountered several bugs and would like to report them so as to help the developers improve this already good simulation programme. The two main bugs that I would like to report are: 1) When changing the theme, it does not change it instantly, so I have to refresh the page; furthermore, if I change the theme, it does not let me change it again, leaving me with a black background without ...

Created by @Focaspeed• 3 days ago

General
user avatar
How do I add music or sound to my circuitverse project?

Created by Divyam Sareen • 5 months ago

General
user avatar
I'm looking for reliable sources to learn Verilog here but I'm having a hard time. Every resource and project up to this point is screaming with an error message at me. Like these: https://circuitverse.org/users/78149/projects/verilog-gates https://circuitverse.org/users/83491/projects/verilog-56b1b150-da09-4d92-bc07-fca70a47fe60 https://circuitverse.org/users/147920/projects/verilog-p...

Created by Bielessin• 2 days ago

General
user avatar
Hilp my
2
Open
Used in my work

Created by Ali ali• 3 days ago

Feedback