Searched Projects

This is the CTH-10 CPU. By CrEePeRz24321. (most updated version of the CTH Series) This uses all binary to operate. First click on Power to start. Turn Op to 1 and double click the RAM. Then type in the Op code you want. Only put inputs and read outputs of the User Interface. Wait until the Red light turns Green then start. If you want to change operations, then turn Op to 1 and double click the RAM. Then type in the Op code you want. (^{If you use full screen, and it keeps on kicking you out when you type, click full screen and then look to the bottom right and press + or - and don't touch the full screen after that unless the RAM input kicks you out})

0 is No Operation - Inputs unavailable

1 is RAM - write the address into In1, write the number you want to store into In2 and press Write.

2 is ADD - write the first digit into In1, write the second digit into In2

3 is Subtract - write the first digit into In1, write the second digit into In2

4 is Counter - Inputs unavailable

5 is AND Gate - write the first digit into In1, write the second digit into In2

6 is a Clock - Inputs unavailable

7 is Accessing the ROM - Inputs unavailable

8 is Binary to Decimal converter

9 is Random Number - Inputs unavailable

10 is Not Gate - write the converting digit into In1

11 is Shift Right* - write the converting digit into In1, write the shift number into In2

12 is Shift Left* - write the converting digit into In1, write the shift number into In2

13 is Multiply - write the first digit into In1, write the second digit into In2

14 is Divide - write the first digit into In1, write the second digit into In2**

HALT is to halt operation

*when using shift the first 3 digits of Out will be nonfunctional

**when using divide the first 4 digits away from the CPU are remainders and the last 4 digits closest to the CPU are quotients.

(There is also a Computer version that doesn't get updated much.)

This is the CTH-10 CPU. This uses all binary to operate. First click on Power to start. Turn Op to 1 and double click the RAM. Then type in the Op code you want. Only put inputs and read outputs of the User Interface. Wait until the Red light turns Green then start. If you want to change operations, then turn Op to 1 and double click the RAM. Then type in the Op code you want. (If you use full screen, and it keeps on kicking you out when you type, click full screen and then look to the bottom right and press + or - and don't touch the full screen after that unless the RAM input kicks you out)

0 is No Operation - Inputs unavailable

1 is RAM - write the address into In1, write the number you want to store into In2 and press Write.

2 is ADD - write the first digit into In1, write the second digit into In2

3 is Subtract - write the first digit into In1, write the second digit into In2

4 is Counter - Inputs unavailable

5 is AND Gate - write the first digit into In1, write the second digit into In2

6 is a Clock - Inputs unavailable

7 is Accessing the ROM - Inputs unavailable

8 is Binary to Decimal converter

9 is Random Number - Inputs unavailable

10 is Not Gate - write the converting digit into In1

11 is Shift Right* - write the converting digit into In1, write the shift number into In2

12 is Shift Left* - write the converting digit into In1, write the shift number into In2

13 is Multiply - write the first digit into In1, write the second digit into In2

HALT is to halt operation

*when using shift the first 3 digits of Out will be nonfunctional