Community

user avatar
I don't understand how the RGB matrix works, like which pins do what, bitwidth for pins, etc., and the user guide doesn't explain it. How does it work?

Created by Sira0909• 14 days ago

General
user avatar
The Splitter asks for #input bit and then for #outputbits, but it shows me alway one single output. I can't even configure the outputbits in the properties. Has anyone a solution.

Created by Lienhard Menzi• 2 days ago

General
user avatar
Can I change color of powered and unpowered wires?

Created by Shadow Realm• 2 days ago

General
user avatar
I'm a teacher and I've had two student who lost all of their work and were unable to recover their projects. When they tried to save, the blue check animation just keeps going. It turns out both students were running an ad blocker in Chrome. I only have two data points on this, but I'm suspecting that this might be the issue. Does anyone have similar experiences or suggestions on what might be ...

Created by Jeff Solin• 2 years ago

General
user avatar
Hallo for everynoe. d'ose somebody know how do I can create a Bus like in the "Not16" circuite of the following project https://circuitverse.org/simulator/18808. thanks for answering.

Created by jackAppleCake• 7 days ago

General
user avatar
I want to rotate the subcircuits I made and also change the place of input and output

Created by Jones• 2 months ago

General
user avatar
I have encountered several bugs and would like to report them so as to help the developers improve this already good simulation programme. The two main bugs that I would like to report are: 1) When changing the theme, it does not change it instantly, so I have to refresh the page; furthermore, if I change the theme, it does not let me change it again, leaving me with a black background without ...

Created by @Focaspeed• 3 days ago

General
user avatar
How do I add music or sound to my circuitverse project?

Created by Divyam Sareen • 5 months ago

General
user avatar
I'm looking for reliable sources to learn Verilog here but I'm having a hard time. Every resource and project up to this point is screaming with an error message at me. Like these: https://circuitverse.org/users/78149/projects/verilog-gates https://circuitverse.org/users/83491/projects/verilog-56b1b150-da09-4d92-bc07-fca70a47fe60 https://circuitverse.org/users/147920/projects/verilog-p...

Created by Bielessin• 2 days ago

General
user avatar
Hilp my
2
Open
Used in my work

Created by Ali ali• 3 days ago

Feedback
user avatar
If you are looking for a resource to buy cryptocurrency profitably, feel free to contact Coin24.io, the best exchanger that works on the territory of Ukraine, Poland and the Czech Republic. Whether it is Kyiv, Odessa, Kharkiv, Warsaw, Prague or Krakow, everywhere you can place an order for the purchase or sale of cryptocurrency in cash in a matter of minutes and receive the desired crypto or fi...

Created by Fllomt• 14 minutes ago

General
user avatar
Hi, I want to set the period of my clock to 8000ms and the delays of my components to be 1/16 of the period of the clock, i.e. to 500ms. I understood that the clock time is 1/2 of the whole period, so I set it to 4000ms. Then, I set my delays to 500 units, and 1 cycle = 4000 units. With these settings, the delays appear shorter than needed. What should be the correct parameters? Thank you in ad...

Created by AlisaG• 1 minute ago

General
user avatar
I am creating gates and adders. I have created a half-adder and I can see it in the tab on the top. Now I would like to reuse it on a new circuit so that I can create a full-adder without having to draw it all. Is that possible?

Created by Fabio• 6 months ago

General
user avatar
I want to create a project using Arduino that contains an electric lock, a keypad, a 16 x 2 LCD screen, and also a sensor to measure the temperature and show the degree on the screen after unlocking the lock, and a fire system. I want to design a circuit if possible.

Created by علي حسين جعفر• 2 months ago

Feedback
user avatar
I try to simulate a sequence finder for 1011 using D Flip Flop. The output is supposed to go HIGH for 1011 but I get the output HIGH at the third digit, means when I have "101". I publish the simulation public as "Find 1011 sequence". Any hint would be appreciated, I might have synthetized a wrong circuit or set something umproperly.

Created by Luca• 2 months ago

Feedback
user avatar
I am unable to find resistors.

Created by Shubham Ingale• 12 days ago

General
user avatar
I want to change the order of the flags in the timing diagram, but I am not sure how. Right now, it seems stuck in the order of 'whichever flag I dropped onto the circuit first.' Is there a way to change the order in the timing diagram without having to delete and re-make the flags in that order? Thanks.

Created by Lavi Zamstein• a minute ago

General
user avatar
My mouse is throwing the diagram all over the place when I try to connect inputs, gates, etc. Is there a way to lock the zoom once you are zoomed in to where you want to be to create a circuit?

Created by Jason Hutchens• a minute ago

General
user avatar
Hi, tell me please what does this little circle in one of inputs of logic gate mean? It's the same like in not gate but it's before gate not after. How do I make it in CV?

Created by Mateusz Borowiec• 1 minute ago

General
user avatar
I want to create a memory unit in which I can store the memory in some other unit by the user but some other user can use that output without seeing the input in some other unit.

Created by Varnit Mittal• a minute ago

General
user avatar
It seems this parameter is not in the file [CV_CustomTheme.json] Is it possible to somehow get the file [CV_CustomTheme.json] with all possible parameters?

Created by Pavel 94• 5 months ago

General
user avatar
I am trying to open the circuitverse on my iPad it shows a Red Screen of death. Can you please tell me why is shows like this. Details: Google Chrome version 92.0.4515.90. Ipad OS 12.5.6 Is is some browser issue or something else.

Created by Gaurav Parashar• 1 month ago

Feedback
user avatar
I am designing an FSM to simulate a ping pong game, and I can't simulate it due to exceeding the stack limit, how can I fix this?

Created by Lourens• 3 months ago

General
user avatar
I'm having the next error with my main CV account. '500 Internal Server Error If you are the administrator of this website, then please read this web application's log file and/or the web server's log file to find out what went wrong.' I can't enter my dashboard, my groups, etc. It's like my account is banned from CV. I've been trying with other browsers and a VM. I really need your help...

Created by Johan Amador• 3 months ago

Feedback
user avatar
I cannot recover my saved files

Created by Bill• 3 months ago

General
user avatar
There doesn't seem to be any hotkey or button for opening the developer console, so I am unable to access RAM or EEPROM content without the developer console, which makes programming very difficult. How do I access the developer console and view coredumped contents, etc?

Created by Nip Dip• 1 year ago

General
user avatar
I'm new to creating circuits, so I wanted to know if there is any way to simulate a basic short-circuit in the simulator

Created by Om Surase• 4 months ago

General
user avatar
How do I create a group to invite my students

Created by Kakou• 7 months ago

General
user avatar
there is a toolbar for timing diagram, but I can't see the graph.

Created by Rounak Das• 1 year ago

General
user avatar
I see, how to chose the bandwidth of an input or output. But: How can specify the state/value of a multibit in- or output in a test case?

Created by Michael Anderegg• 5 months ago

General