CSC4536
0 Stars     7 Views    

Author: Ibrahim Hazmi

Forked from: Marion Saves/CSC4536

Project access type: Public

Description:

Création d'un processeur dans le cadre du cours Compilation-CSC4536 de deuxième année du cycle ingénieur à Télécom SudParis.

Description du cours:

A complete 8-bit CPU starting from a nand for the students of Telecom SudParis/Institut Polytechnique de Paris, which consists in:

  • 8 8-bits registers
  • A ROM of 32 bytes and a RAM of 256 bytes. Addresses from 0 to 31 goes to the ROM, the others to the RAM
  • A simple instruction set inspired by MIPS (lw, sw, addiu, addu, etc...)

In details, we build the circuits one after the other, and as soon as we have implemented them, we reuse the ones provided by circuitverse. For the basic circuits, we have

  • nand and nand-cc: to explain how we use circuitverse (optional)
  • gates: to understand how we can build the gates (optional)
  • z4?: returns 0 if a 4-bit value is equal to 0 (required)
  • 1-to-8: replicates a bit 8 times in a 8-bit value (optional)
  • half-add, 1-add, 4-add: step by step implementation of a (4 bits) adder (optional)
  • 1x1-mux, 1x2-mux, 2x2-mux: step by step implementation of a (2x2bits) multiplexers (optional)
  • ADD: a simple ALU only able to execute add (required)
  • ADD/AND: an ALU able to do AND/ADD based operations (optional)
  • shr-1, shr-2, shr-4, shr, revert, barrel-shifter: step by step implementation of a Barrel-Shifter (optional)
  • ALU: an ALU able to do AND/ADD/SHR based operations (optional)
  • SR-nand, JK-flip-flop, half-D-flip-flop, pre-D-flip-dlop, D-flip-flop: step by step implementation of a (one bit) D-flip-flop
  • 2x1-demux: a 1-bit demultiplexer with 4 outputs (optional)
  • 4-RAM: shows how we can implement a pseudo-RAM of 4 bytes from registers (optional)

For the CPU, we have:

  • CPU-v0: a circuit that increments a register at each clock cycle
  • REGS: a helper that simplifies the use of a register
  • CPU-V1: the beginning of the final CPU. Just use REGS with a register
  • MINI-PC: a circuit that performs an increment module 5. Used for the loop that fetches the instructions from memory. 
  • CPU-V2: connect the MINI-PC to the REGS
  • REGISTERS: a helper based on REGS that hides the complexity of managing 8 registers
  • CPU-V3: the CPU-v2 with 8 registers and the REGISTERS circuit
  • insn-builder: a helper circuit able to compute the value of an instruction from simple inputs
  • MICROCODE: the microcode used by the processor (a loop that (i) loads the first 8-bytes of the instruction in %insnl, increments PC, loads the next 8 bytes in %insnh, increments PC and executes the instruction)
  • CPU-v4: connect the MICROCODE to the CPU-V3 (to MINI-PC). At each cycle, the MICROCODE outputs the instruction that we have to execute.
  • DECODER: instruction decoder
  • CPU-v5: connect the DECODER to CPU-v4
  • CPU: the final CPU. Technically CPU-v5 with an ALU and a memory composed by a ROM (addresses 0 to 31) and a RAM (addresses from 32 to 256). 

The CPU executes the code "char x; while(true) x++;" where x is located at address 0xff. In details, the CPU executes this code, which is located in ROM:

  •   li %r0, 0xff.     /* implemented with addiu %r0, 0xff */
  • lab:
  •   lw %r1, (%r0)
  •   addiu %r1, 1
  •   sw %r1, (%r0)
  •   br lab             /* implemented with addiu %pc, -8 */

Created: Jul 08, 2024

Updated: Jul 08, 2024


Comments

You must login before you can post a comment.