Community

user avatar
How do I make a 16-bit input?

Created by Eddie• 2 months ago

General
user avatar
So I was working on a project from my Digital Systems class, putting together an 8 bit CPU, and I copy and pasted something and did CTRL Z realizing I didn't want it on a subcircuit and now the circuit won't stop loading. I've tried closing my browser and it still doesn't break the loading spell that my circuit seems to be under. I also tried to click between the subcircuits or the main circui...

Created by Ian Zentner• 2 months ago

General
user avatar
Hi all, I created a combinatory subcircuit with 4 inputs an 2 outputs. The inputs are on the right side and are positioned from top to bottom, in this order: inp_0, inp_1, inp_2, inp_3. The outputs are positioned on the left side, always from top to bottom, in this order: out_0, out_1. When I insert the subcircuit into the main one, the order of the inputs and outputs is not respected, in f...

Created by deliriousverilog• 6 days ago

General
user avatar
I have a bus that many tri-state components can choose to write too, but may not. I would like it if when no components write to the bus, it goes to 0x00000000. In a real circuit you could accomplish this with pull-down resistors. Is there a way in circuitverse or do I need another tri-state device to write a bunch of zeroes when enabled?

Created by Dandurin• 17 minutes ago

General
user avatar
I'm creating a circuit with an accumulator. Sometimes the circuit page gets auto-refreshed and the accumulator gets reset to 0. This weird behavior happens even if I disabled "clock enabled" in properties. Can I disable this auto-refresh?

Created by deliriousverilog• 1 hour ago

General
user avatar
I am doing a 3-bit asynchronous down counter and I want the clock to stop when the counter gives 0 as output. How do I do this? Please help me

Created by Shruti• 3 days ago

General
user avatar
how to prove distributive law using nand gates

Created by priya• a minute ago

General
user avatar
I am making a "enabler" which takes an 8bit input and an 1bit enable. The output is also an 8bit. When I try to change one bit of the input to 1 it just says that the output is forced to be 0 as though the output was an input. It worked last time so yeah.

Created by gan251mleap• 4 months ago

General
user avatar
I created a simple D FF circuit where the inverting output of the flip-flop is the input to the same flip-flop. It gives me the stack error. Any way around this? Thanks!

Created by Jude Pearse• 9 days ago

General
user avatar
Hello, I'm in the process of making a custom computer and I'm working on getting it to run programs. However, writing machine code to EEPROM one instruction or value at a time is difficult. I have an assembly language and an assembler, and I'd prefer to import that data instead of writing machine code manually, which is error-prone and tedious. Is there any way I could import an external binary...

Created by Andrew Lobley• 7 days ago

General